Alnor balometer air capture hood. In full working order including 5x hoods, all frames, manual, low flow diffuser and anti static fluid. The hood sizes included are. 2x2 (already attached as most common). This unit is analog so no batteries required!Reads in m3/h but easy calculations to l/s. Has been tried and tested in both supply & extract and holds a steady read. The Alnor® Balometer® Air Balancing Instrument is designed to assist you in rapid and accurate measurements of air distribution in heating, ventilating, and air conditioning systems. The Balometer® instrument directly reads average air flow rate, either intake or outflow, at ceiling, wall or floor diffusers. In use, air to be measured is directed past a manifold which senses flow at multiple points spread across a carefully sized area. The manifold is designed so that the air volume is sensed at either supply or return diffusers with equal accuracy. The manifold is connected through the range selector to an Velometer® anemometer which can be provided with scales for English measurement units of cubic feet per minute (CFM) or either of two metric scales, cubic meters per hour (cmh) or liters per second (l/s), and is capable of reading flows up to 2000 CFM (3400 cmh, 950 l/s). This time-proven Velometer® anemometer is the heart of the Balometer® measuring system. A single knob direction and range selecting unit allows control of the Balometer® instrument for either supply or return diffusers, on ranges of 100 to 500, 400 to 1000, and 800 to 2000 CFM.
(170 to 850, 700 to 1700, and 1400 to 3400 cmh; 50 to 240, 200 to 475, and 400 to 950 l/s). A Low flow adapter is also included with each Balometer® instrument for accuracy in balancing modern air systems which incorporate low volume diffusers. When used with the most sensitive range selector setting it provides an additional measurement range up to 250 CFM (400 cmh, 120 l/s).
For increased flexibility the unit can be supplied with up to five sizes of nylon hoods which fit interchangeably on the instrument base. The 2 x 2 size is standard and is attached to its own permanent frame. Other hoods (2 x 2, 1 x 4, 1 x 5, 3 x 3) are used with frame pieces which must be assembled by the user. Will be sent by courier to UK only.
The item "TSI Alnor Balometer air capture flow hood ventilation commissioning balancing" is in sale since Wednesday, May 30, 2018. This item is in the category "Business, Office & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Other Test Meters & Detectors". The seller is "fox2749" and is located in Bradford. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Japan, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.